Florabest FLV 1200 A1 User Manual download pdf (Page 12)

12

GB

Wear can be identied from an increas-

ingly poor result.

The r

eadjusting depth amounts to approx.

3 mm per setting.

When the implement is delivered it

is in the Transport Position 0 setting.

1. The implement must be switched off to

set the working position.

2. Pull the adjusting knob for adjustment

(see

A

9) and turn

it to the desired

position until it clicks into place.

Both wheels (right and left) must be in-

dividually set to the same position.

The setting button is not intended

for height adjustment but rather to

compensate for wear. Selection of

a readjustment position without the

corresponding wear can overload

the motor and damage the cylinder.

Switching on and off

Before switching on the im-

plement ensure that it is not

in contact with any objects.

Keep your feet and hands

well away from the cylinder

and the ejector opening. Dan-

ger of injury!

D

1. Place the implement on a level

lawn surface.

2. Connect the power cable (17)

with the extension cable.

3. Form a loop in the end of the

power cable and hang it into the

strain relief (18).

4. Connect the implement to the

mains voltage.

5. To switch on press the unlocking

button on the handle (1) and

simultaneously press the starting

lever (2). Release the unlocking

button (1).

6. To switch off release the starting

lever (2).

Overload protection: The mo-

tor is automatically switched off

when the implement is overloaded.

Release the starting lever and reset

the implement after a cooling down

period of approx. 1 minute.

WARNING! The cylinder con-

tinues to run for a brief pe-

riod after the implement has

been switched off. Do not tilt

or carry the implement while

the motor is still running and

do not touch the cylinder

while it is still rotating. Dan-

ger of injury!

Working with the implement

To maintain a well cared-for lawn it should

be aerated every 4 to 6 weeks.

Verticuting is a more intensive intervention

than aerating and should only be carried

out once a year, the best time being in

spring after the lawn has been mown for

the rst time.

When working on slopes

always proceed across the

slope. Be particularly careful

when walking backwards

and pulling the implement.

Danger of stumbling!

After work and to transport the im-

plement disconnect the power plug

and wait until the cylinder is stand-

ing still.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 115 116

Comments to this Manuals

No comments