47
GB
The manufacturer cannot be held liable for
damage caused by incorrect operation of
the implement or if it is not used in con-
formity with its intended purpose.
General description
Scope of delivery
Carefully unpack the implement and check
that all the subsequently listed parts are
complete:
• Implement case with verticuttor cylinder
and impact protector
• Aerating cylinder
• Upper handle bar complete with start-
ing lever, power plug, unlocking button
and rmly mounted power cable
• Lower bar
• 2 centre bars
• Collection bag
• Cable strain relief
• 2 cable clamps
• Mounting accessories:
- 2 Philips screws, 4 screws and 4
wing nuts to fasten the bar
- Spanner to change the cylinders
• Instruction Manual
Ensure during assembly that the
power cable is not squeezed and
that it has sufcient play.
Overview
The most important functional
parts are illustrated on the
cover page.
1 Unlocking button
2 Starting lever
3 Upper handle bar
4a+b 4 screws and 4 wing nuts to se-
cure the bar
5 Collection bag
6 Impact protector
7 Lower bar
8 Implement case
9 Setting button
10 2 rear wheels
11 2 wheels
12 Machine cable terminal
13 Spanner
14 Tool holder
15 2 centre bars
16 Machine cable terminal
17 Electric cable
18 Cable strain relief
19 Machine cable
20 Aerator cylinder with sprung
tines
21 Verticutor cylinder with knives
22 Fastening screw
23 Collection bag rods
24 Square receptacle
Functional description
The verticuttor and lawn aerator has two
easily exchangeable work cylinders:
An aerator cylinder made of hard plastic
with vertically rotating sprung tines, and a
verticutor cylinder with vertically mounted
high-grade steel knives.
The implement features a high-quality plas-
tic case with collection bag and a handle
bar with a folding function. Please refer to
the subsequent descriptions for the actual
functions of the individual control elements.
Technical data
Electric Scarier /
Aerator ...................... FLV 1200 A1
Motor input .............................. 1200 W
Rated voltage ........... 230-240 V~, 50 Hz
Protection Class ...............................
II
Degree of protection .........................IPX4
Rotating speed of the tool (n
o
)
......................................3500 min
-1
(r.p.m)
Cylinder width ..............................31 cm
Readjustment range for wear ...........9 mm
Comments to this Manuals