Florabest KH 4236 User Manual download pdf (Page 5)

- 3 -

Items supplied

1 1 x Barbecue skewer

(incl. 2 x Barbecue racks and 1 x Wooden handle)

2 1 x Wind protector, left

3 1 x Wind protector, Middle

4 1 x Wind protector, right

5 1 x Grill

6 1 x Firebowl

7 1 x Handle

8 2 x Handle holder, short

9 2 x Stand braces

0 2 x Cross braces

q 5 x Storage slats, long

w 2 x Wheels

e 1 x Axle

r 2 x Wheel brace

t 2 x Storage holder, long

z 2 x Reinforcing braces

u 3 x Storage slats, short

Connection elements

M5x10

25x

M5x12

22x

Ø4x10

2x

M5

47x

M8

2x

Ø5.4

47x

M4x10

2x

Assembly

Attention!

To avoid possible injury, the screw heads should

always face outwards. First tighten all screw

connections down when the assembly is complete,

this will help avoid undesirable material tensions.

1. Place the ﬁ rebowl 6 with the ﬁ ve holes the

longer sidewall to the rear, on the work surface.

2. Connect a long storage holder t with the wheel

braces r by means of the washers Ø 5.4,

M5 x 10 screws and nuts M5.

Please take note that only the lower holes are to

be used for the screws.

3. Assemble the wheel braces r with the assem-

bled long storage holder t to the left on the

ﬁ re bowl 6 by means of the washers Ø 5.4,

2 M5 x 12 screws, 2 M5 x 10 screws and

nuts M5. For this, use the upper hole in the

wheel braces r.

4. Secure the reinforcing braces z with the

wheel braces r by means of the washers Ø

5.4, M5 x 10 screws and nuts M5. Connect

the reinforcing braces z with the long storage

holder t by means of the washers Ø 5.4,

M5 x 10 screws and nuts M5.

5. Assemble the short handle holder 8 and stand

braces 9 as described in points 2. and 3.

Fix the handle 7 between the short handle

holders 8 and then secure them by means

of the wood screws Ø 4 x 10.

6. Place the cross braces 0, with the 5 holes

facing upwards, between the wheel braces r

and the stand braces 9. Screw these together

by means of the washers Ø 5.4, M5 x 10

screws and nuts M5.

7. Fix the ﬁ ve long storage slats q to the cross

brace 0. Secure them using washers Ø 5.4,

M5 x 12 screws and M5 nuts.

8. Assemble the short storage slats u for the

storage holder t by means of the washers

Ø 5.4, M5 x 12 screws and M5 nuts.

9. Guide the axle e through the lower boreholes

on the wheel braces r and secure the placed-

on wheels w with the self-securing nuts M8.

10. Join the wind protector elements 2 3 4

together with 2 M5 x 10 screws and M5 nuts

(only at the top). When done, secure the wind

protector element 2 3 4 from inside onto

the ﬁ rebowl 6 by means of the washers

Ø 5.4, 2 M5 x 12 screws, 3 M5 x 10 screw

and nuts M5.

11. Secur

e the wooden grip 1 onto the rear part

of the skewer 1, (straight edge) with light

hammer blows. Slide the barbecue racks 1

onto the skewer. Secure the barbecue racks

1 with the eye screws M4 x 10.

12. Place the grill 5 and the skewer 1 inside the

wind protector 2 3 4.

IB_KH4236_RP46150_LB4.indd Abs1:3IB_KH4236_RP46150_LB4.indd Abs1:3 23.12.2009 16:32:30 Uhr23.12.2009 16:32:30 Uhr

1 2 3 4 5 6 7 8 9 10 ... 34 35

Comments to this Manuals

No comments