Florabest FHE 710 A1 User Manual download pdf (Page 10)

GB

10

and collection facilities, ensure

these are connected and prop-

erly used. Use of dust collection can

reduce dust-related hazards.

Power tool use and care

• Do not force the power tool. Use

the correct power tool for your

application. The correct power tool

will do the job better and safer at the

rate for which it was designed.

• Do not use the power tool if the

switch does not turn it on and

off. Any power tool that cannot be

controlled with the switch is dangerous

and must be repaired.

• Disconnect the plug from the

power source and/or the bat-

tery pack from the power tool

before making any adjust

-ments, changing accessories, or

storing power tools. Such preven-

tive safety measures reduce the risk of

starting the power tool accidentaIly.

• Store idle power tools out of the

reach of children and do not al-

low persons unfamiliar with the

power tool or these instructions

to operate the power tool. Power

tools are dangerous in the hands of

untrained users.

• Maintain power tools. Check

for misalignment or binding

of moving parts, breakage of

parts and any other condition

that may affect the power tool’s

operation. If damaged, have

the power tool repaired before

use. Many accidents are caused by

poorly maintained power tools.

• Keep cutting tools sharp and

clean. Properly maintained cutting

tools with sharp cutting edges are less

Iikely to bind and are easier to control.

• Use the power tool, accessories

and tool bits etc. in accordance

with these instructions, taking

into account the working con-

ditions and the work to be per-

formed. Use of the power tool for op-

erations different from those intended

could result in a hazardous situation.

• Carefully inspect the area to be cut

and remove all wires or other foreign

bodies.

Service

• Have your power tool serviced

by a qualied repair person us-

ing only identical replacement

parts. This will ensure that the safety

of the power tool is maintained.

Chain saw safety warnings

• Keep all parts of the body

away from the saw chain when

the chain saw is operating. Be-

fore you start the chain saw,

make sure the saw chain is not

contacting anything. A moment of

inattention while operating chain saws

may cause entanglement of your cloth-

ing or body with the saw chain.

• Always hold the chain saw with

your right hand on the rear

handle and your left hand on

the front handle. Holding the chain

saw with a reversed hand congura-

tion increases the risk of personal inju-

ry and should never be done.

• Wear safety glasses and ear

protection. Other protective

equipment for the head, hands,

legs and feet is compulsory. Ad-

equate protective clothing will reduce

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 131 132

Comments to this Manuals

No comments