Florabest FHE 710 A1 User Manual download pdf (Page 16)

GB

16

Switching On and Off

1. Put on the shoulder belt (

14) (see “Attaching/Setting the

Shoulder Belt”).

2. Connect the power cable (12)

with the extension cable.

3. Make a loop in the end of the

extension cable and suspend this

in the cable strain relief element

(11) on the handle (9).

4. Connect the equipment to a pow-

er supply with the supply voltage

specied on the rating plate.

5. Hold the equipment rmly in a

relaxed and safe manner (see

).

6. Operate starting lock (13) and

switch on the pruning saw at

on/off switch (10).

For safety reasons, a lockable

continuous operation setting is

not possible.

7. The equipment will switch off

again when you release on/off

switch (10).

Checking the oil automation

Before starting work, check the oil level in

the oil automation system

1. Switch the device on and hold it above

clear ground. The device should not

touch the ground.

2. If a trace of oil appears, the device is

working awlessly.

3. If no trace of oil appears, clean the oil

outlet channel (

22) or have the de-

vice repaired by our customer service

department.

4. To clean, wipe the residues from the oil

outlet channel (

22) using a brush

or a rag.

Adjusting the Telescopic

Handle

The telescopic handle can be innitely ad-

justed using quick release (17).

1. Push the lever (17a) forward

as shown in the illustration then

push and pull to adjust the han-

dle length.

2. Pull back the lever (17a) and so

x the desired working length of

the telescopic handle.

3. If the lever (17a) comes loose,

tighten the Allen screw (17b)

using the Allen key (20).

Adjusting the handle

The incline angle of the handle (9) can be

adjusted continuously.

1. Loosen pivotal centre (8) and

and xing the adjustable handle

(9) on position.

2. Replace the pivotal centre (8) to

xation.

Transport

• Put on blade cover ( 18).

• Ensure that you do not switch on the

equipment when carrying it.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 131 132

Comments to this Manuals

No comments